Metallic Matte Bronze 80"Ceiling Fan from the Turbine Collection

Fan looks good & performs well. The remote only works if pointed at the fan. It does not work as a wall control. STOP MAKING FANS WITH REMOTES!

Beautiful fan quiet and moves a lot of air. This is a fairly heavy fan (good quality I hope). Installation leaves a bit to be desired. The LP website indicates that the fan can be hung on a sloped ceiling up to 20 degrees. This is not the case the fan comes with a mount that is only suitable for a level ceiling mount. The LP rep insisted that the fan would mount on a sloped ceiling as he was reading the same product description as I had seen previous to purchase. After more research I was able to obtain a slope adapter from an internet vendor not to be named. The adapter worked well for me although the canopy itself is the supporting part for the fan. I was surprised that the receiver for the remote was to be installed loose in the canopy Ala old school fans. Takes some doing to get the receiver inside the canopy the wiring made up and then locate the canopy over the screws on the side of the ceiling bracket (again heavy fan). Remote works very well absolutely no wobble and quiet. I am in southern Arizona so all the fans in the home see significant use. So far the problem has been that previous fans (other manufacturers) become noisy like dry bearings. Hopefully the Hinkley fan has sufficient lubricant in the bearings to provide long quiet service as alluded to in the instruction manual. Very happy with the fan thus far hopefully the info on the web can be updated to indicate the requirement for additional parts for mounting on a sloped ceiling. Thanks for reading.

Beautiful fan quiet and moves a lot of air. This is a fairly heavy fan (good quality I hope). Installation leaves a bit to be desired. Lamps Plus website indicates that the fan can be hung on a sloped ceiling up to 20 degrees. This is not the case the fan comes with a mount that is only suitable for a level ceiling mount. The LP rep insisted that the fan would mount on a sloped ceiling as he was reading the same product description as I had seen previous to purchase. After more research I was able to obtain a slope adapter from Build.com. The adapter worked well for me although the canopy itself is the supporting part for the fan. I was surprised that the receiver for the remote was to be installed loose in the canopy Ala old school fans. Takes some doing to get the receiver inside the canopy the wiring made up and then locate the canopy over the screws on the side of the ceiling bracket (again heavy fan). Remote works very well absolutely no wobble and quiet. I am in southern Arizona so all the fans in the home see significant use. So far the problem has been that previous fans (other manufacturers) become noisy like dry bearings. Hopefully the Hinkley fan has sufficient lubricant in the bearings to provide long quiet service as alluded to in the instruction manual. Very happy with the fan thus far hopefully the info on the web can be updated to indicate the requirement for additional parts for mounting on a sloped ceiling. Thanks for reading.

We installed this fan in our new solid foam core roof that we had built inside our lanai birdcage. It's just about perfect: quiet attractive solidly built and moves as much air as needed. Sometimes we just want a little breeze but when it's really warm we can get lots of movement with the touch of a button.

Beautiful design sturdy well constructed and accurate mechanism. The remote lends us an easy clean solution without wires to control the light and fan speeds on/off. Our electrician was in and out within an hour.

I wish I had heated about these fan when I was building my home these fan are great they put off a lot air movement

I wish I had heated about these fan when I was building my home these fan are great they put off a lot air movement